The engine-drawn title bar grew to 48 px with 24x24 window controls, 12 px away from the edge and from each other, all sharing one hover highlight. The controls use textures now (gui/cross, gui/minimize_w, gui/maximize_w and gui/restore_w when maximized) with the vector icons kept as a fallback, and the title is centred in the bar, clamped to the free space between the button groups. The bar now sits inside invisible margins that carry a drop shadow, so the window is resizable from outside the visible frame: the surface is content plus twice SHADOW_MARGIN and xdg_surface.set_window_geometry tells the compositor which part is the window. The shadow follows Adwaita's window shadow: a Gaussian blur of 7 px (sigma 3.5) expanded by 1 px, rgba(0,0,0,0.5) focused and 0.3 in the backdrop, plus a 1 px hairline, symmetric on all four sides - a 16 px wide frame would show a fatter tail than the reference. Margins exist only while the window is decorated by us and not maximized or fullscreen. The engine composes the frame itself: it renders exactly as before, then the backend copies the frame into a texture, clears the surface, draws the shadow and puts the content in place with alpha forced to 1, which keeps the frame opaque without touching a single render pass. Only frames the engine actually drew are cached, and the EGL window is resized before its surface size is asked for, so no frame is composed from a buffer the compositor just replaced - that was the one frame blink after a resize. Resize cursors match GNOME: directional shapes for edges and corners (w/e/n/s/ne/nw/se/sw) instead of the double-headed diagonals, with the extra CursorShape values appended so the existing GLFW indices stay. Measured: window 1123x751 opens as saved, fullscreen round trip returns the same size with the settings untouched, the shadow alpha profile is 0.20/0.10/0.03 at 1/4/7 px from the edge against Adwaita's 0.21/0.095/ 0.055, all four sides equal, menu layout baseline unchanged (706), no errors in the log. |
||
|---|---|---|
| .github | ||
| dev | ||
| doc | ||
| res | ||
| src | ||
| test | ||
| vctest | ||
| .clang-format | ||
| .cmake-format.py | ||
| .gitignore | ||
| CHANGELOG.md | ||
| CMakeLists.txt | ||
| CMakePresets.json | ||
| compile_flags.txt | ||
| Dockerfile | ||
| flake.lock | ||
| flake.nix | ||
| LICENSE | ||
| README.md | ||
| run.sh | ||
| vcpkg.json | ||
VoxelCore
Latest release
Build project in Linux
Install libraries
Install EnTT
Installing last version that supports C++17.
git clone --branch v3.16.0 https://github.com/skypjack/entt.git
cd entt
mkdir -p build && cd build
cmake -DCMAKE_BUILD_TYPE=Release -DENTT_INSTALL=ON ..
sudo make install
Warning
If you are using ALT Linux, do not use this EnTT installation method.
ALT Linux based distros
su -
apt-get install entt-devel libglfw3-devel libGLEW-devel libglm-devel libpng-devel libvorbis-devel libopenal-devel libluajit-devel libstdc++13-devel-static libcurl-devel libfreetype-devel libssl-devel
Debian based distros
sudo apt install libglfw3 libglfw3-dev libglew-dev libglm-dev libpng-dev libopenal-dev libluajit-5.1-dev libvorbis-dev libcurl4-openssl-dev libssl-dev libfreetype6-dev
Tip
CMake missing
LUA_INCLUDE_DIRandLUA_LIBRARIESfix:sudo ln -s /usr/lib/x86_64-linux-gnu/libluajit-5.1.a /usr/lib/x86_64-linux-gnu/liblua5.1.a sudo ln -s /usr/include/luajit-2.1 /usr/include/lua
RHEL based distros
sudo dnf install glfw-devel glew-devel glm-devel libpng-devel libvorbis-devel openal-soft-devel luajit-devel libcurl-devel libfreetype-devel openssl-devel
Arch based distros
sudo pacman -S glfw glew glm libpng libvorbis openal luajit curl freetype2 openssl
Building engine with CMake
git clone --recursive https://github.com/MihailRis/VoxelCore.git
cd VoxelCore
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
cmake --build . --parallel
Tip
Use
--parallelto utilize all CPU cores during build.
Building project in macOS
Install libraries
brew install glfw3 glew glm libpng libvorbis lua luajit libcurl openal-soft skypjack/entt/entt freetype
Tip
If Homebrew fails to install
lua,luajit, oropenal-soft, download, compile, and install them manually.
Building engine with CMake
git clone --recursive https://github.com/MihailRis/VoxelCore.git
cd VoxelCore
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
cmake --build . --parallel
Building in Windows
Note
Requirements: vcpkg, CMake, Git, and Visual Studio (with C++ tools).
There are two options to use vcpkg:
- If you have Visual Studio installed, the VCPKG_ROOT environment variable is often already set in the Developer Command Prompt for VS.
- Otherwise, install vcpkg manually:
cd C:\
git clone https://github.com/microsoft/vcpkg.git
cd vcpkg
.\bootstrap-vcpkg.bat
Then set the VCPKG_ROOT environment variable and add it to PATH:
$env:VCPKG_ROOT = "C:\vcpkg"
$env:PATH = "$env:VCPKG_ROOT;$env:PATH"
Tip
For troubleshooting, refer to the official vcpkg documentation.
After installing vcpkg, build the project:
git clone --recursive https://github.com/MihailRis/VoxelCore.git
cd VoxelCore
cmake --preset default-vs-msvc-windows
cmake --build --preset default-vs-msvc-windows
Note
Make sure your
CMakeUserPresets.json(if used) contains the correctVCPKG_ROOTpath.
Building with CLion (MinGW / Ninja)
Note
Requirements: vcpkg, Git, and CLion (bundled with CMake, Ninja and MinGW toolchain).
Warning
Avoid installing tools in paths with spaces (e.g.
Program Files). This may break MinGW builds (especiallywindres).
Install vcpkg manually as described in the Visual Studio section.
Configure CLion
Open the project in CLion and configure CMake profile:
Settings → Build, Execution, Deployment → CMake
Reload CMake project and build the engine.
Build using Docker
Note
First, install Docker Engine: https://docs.docker.com/engine/install
On Linux
Step 1. Build Docker image
docker build -t voxel-engine .
Step 2. Build project inside container
docker run --rm -it -v "$(pwd):/project" voxel-engine bash -c "cmake -DCMAKE_BUILD_TYPE=Release -Bbuild && cmake --build build --parallel"
Step 3. Run the application (requires X11 forwarding)
docker run --rm -it \
-v "$(pwd):/project" \
-v /tmp/.X11-unix:/tmp/.X11-unix \
-v "$XAUTHORITY:/home/user/.Xauthority:ro" \
-e DISPLAY="$DISPLAY" \
--network=host \
voxel-engine ./build/VoxelCore
On Windows
Note
You need an X server like VcXsrv to display the GUI.
Step 1. Install and run VcXsrv
Launch with:
.\vcxsrv.exe :0 -multiwindow -ac
Step 2. Build Docker image
docker build -t voxel-engine .
Step 3. Build project
docker run --rm -it -v "${PWD}:/project" voxel-engine bash -c "cmake -DCMAKE_BUILD_TYPE=Release -Bbuild && cmake --build build --parallel"
Step 4. Run the application
docker run --rm -it -v "${PWD}:/project" -e DISPLAY=host.docker.internal:0.0 --network=host voxel-engine ./build/VoxelCore